Menendez Magazine v2.0

Overview

The MenMag v2.0 is an update to the original MenMag v1.0, the first 3D-printable Glock magazines. The v2.0 solves the biggest issues with the original: difficult printing, limited lifespan, nosediving, tight magwell fitment, and inconsistency between prints. Every part was redesigned from scratch (no v1.0 parts are compatible).

In dry-cycle testing, magazines lasted over 1,000 rounds without the body wearing out, a massive improvement over the v1.0. Live-fire testing showed perfect reliability across hundreds of rounds in multiple applications.

Capacity Variants

Variant	Rounds	Notes
Menendez	17	Standard G17 capacity
Baby Menendez	15	Mid-size
Mini Menendez	10	Restricted-state compliant
Extendez	30	Extended
FGC-9	25	BWMod variant

Print Settings

• Nozzle: 0.4 mm (mandatory)
• Layer Height: 0.15 mm (strongly recommended, feed lips depend on it)
• Temp: 230 °C nozzle / 60 °C bed
• Infill: 100%
• Walls: 8 recommended (makes the body essentially all walls, reduces swelling when loaded)
• Supports: None on magazine body, baseplate, or locking tab. Optional full supports on follower only.
• Cooling Fan: Off by default, autocooling 35–60% min/max, 80% bridges.
• Bed Adhesion: Glue stick or hairspray.

All STL files are pre-scaled and pre-oriented. Print as-is.

Parts Per Magazine

Print one of each:

• Magazine body (choose your capacity variant)
• Baseplate (G26/G19 Angle, G17 Angle, or Standard)
• Locking tab
• Follower
• Magazine spring (see assembly tutorial PDF)