3D Print June 1, 2025
FMDA DD19.2
#glock#g19#fmda#frame#9mm
Overview
FMDA's stippled Glock 19 V2 frame. The compact carry-size platform chambered in 9mm, the most popular Glock form factor. This is the standard DD19.2 from the FMDA V2 Gigapack.
Multiple STL variants are included: stippled, no-microtexture, no finger grooves, OEM-ish with finger grooves, and a Strike80 G19 variant.
Print Settings
- Nozzle: 0.4 mm
- Layer Height: 0.15 mm
- Temp: 225–230 °C nozzle / 60 °C bed
- Infill: 100%
- Supports: On, full. Interface gap ≤ 0.15 mm. Tree supports recommended.
- Cooling Fan: 20% normal, 50% bridges. Off for first 10 layers.
- Orientation: Rails down for best durability.
Slicer Notes
- Support X/Y Distance: 1.3 mm (prevents Cura from supporting stipples)
- Enable Z-hop on retract
- PrusaSlicer: set "Detect Thin Walls" to off
Microtexture
Use the stippled/microtexture version only on FDM printers with PLA. For nylon or resin, use the no-microtexture version.
Parts Needed
- DD19.2 Rail & Locking Block Kit
- Glock 19 Gen 3 complete slide
- Glock 19 lower parts kit
- Glock 19 magazine